Ecotex® Liquid Tape - Water Resistant Block Out For Screen Printing

Description

Emulsion  |  Chemicals  |  Ink  | Equipment  |  Inkjet Film
Ecotex® LIQUID TAPE BLOCK OUT - Screen Printing Supplies - Gallon Quart Pint
For Use With:
Water-Based Inks
Discharge
Key Features:
Fast Drying
Non Hazardous
Fills Open Areas
Good for long print runs
Simple & Easy To Use
Ecotex® Water Based Resistant Block Out is the ultimate screen block out. This fast drying formula is durable and high abrasion resistant. It's designed to fill open areas of the screen not covered by the emulsion. It is ideal for water based and discharge printing.
Shelf Life:
+12 months
For best results follow the steps below.
When the screen is dry and free of contaminants, put the block out on the print  side of the screen and spread it over the open areas until it is completely filled.
Touch up the defects. This includes blobs of product which tend to dry outside and pop off or smear during printing. When very fine meshes are used you can reduce the viscosity by adding a little bit of water.
Suggested methods for removal:
Due to the water resistant nature of this product it is hard to reclaim off of your screen. Please see steps below for suggested methods of removal
Emulsion Remover and a pressure washer. Do not leave emulsion remover on for longer than 1 minute, it will harden the product.
Hyper Haze (degreaser and ghost remover) and a pressure washer. This product can be left overnight in order to soften the product for removal with the pressure washer
See our other items
Payment
Shipping
We accept payment by any of the following methods:
PayPal, Google Pay, Visa, Mastercard, American Express and Discover
We offer
FREE shipping
on all orders in the continental USA!
Your order will be dispatched same day after  receiving payment (Monday-Friday) if order is made by 12:00 PM PST and you should expect to receive it  two days after dispatch. If order is purchased together with multiple products your order may ship ground 3-5 days.
In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement.
About
​​​​​​​
Mission
Screen Print Direct promises high quality products at revolutionary prices. We have cut the middle man out of the equation and offer superior products straight from the manufacturer. We will continue to innovate and only produce the best products at the best prices.
Our Promise
We promise to always provide affordable high quality products. We also promise to offer the best customer service and best screen printing advice, your success is our success. Our customers are real hustlers and go-getters! We know the humble beginnings of a print shop and your ambitious attitude & drive inspires us daily!
Returns
If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not.
You can return a product for up to 14 days from the date you purchased it.
Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt.
Shop By Department
For Use With: ---Water-Based Inks ---Discharge Key Features: ---Fast Drying ---Non Hazardous ---Fills Open Areas ---Good for long print runs ---Simple & Easy To Use Ecotex® Water Based Resistant Block Out is the ultimate screen block out. This fast drying formula is durable and high abrasion resistant. It's designed to fill open areas of the screen not covered by the emulsion. It is ideal for water based and discharge printing. Shelf Life: +12 months For best results follow the steps below. 1-- When the screen is dry and free of contaminants, put the block out on the print side of the screen and spread it over the open areas until it is completely filled. 2-- Touch up the defects. This includes blobs of product which tend to dry outside and pop off or smear during printing. When very fine meshes are used you can reduce the viscosity by adding a little bit of water. Suggested methods for removal: Due to the water resistant nature of this product it is hard to reclaim off of your screen. Please see steps below for suggested methods of removal 1--Emulsion Remover and a pressure washer. Do not leave emulsion remover on for longer than 1 minute, it will harden the product. 2--Hyper Haze (degreaser and ghost remover) and a pressure washer. This product can be left overnight in order to soften the product for removal with the pressure washer
Ecotex® LIQUID TAPE BLOCK OUT - Screen Printing Supplies - Gallon Quart Pint
For Use With:
Water-Based Inks
Discharge
Key Features:
Fast Drying
Non Hazardous
Fills Open Areas
Good for long print runs
Simple & Easy To Use
Ecotex® Water Based Resistant Block Out is the ultimate screen block out. This fast drying formula is durable and high abrasion resistant. It's designed to fill open areas of the screen not covered by the emulsion. It is ideal for water based and discharge printing.
Shelf Life:
+12 months
For best results follow the steps below.
When the screen is dry and free of contaminants, put the block out on the print  side of the screen and spread it over the open areas until it is completely filled.
Touch up the defects. This includes blobs of product which tend to dry outside and pop off or smear during printing. When very fine meshes are used you can reduce the viscosity by adding a little bit of water.
Suggested methods for removal:
Due to the water resistant nature of this product it is hard to reclaim off of your screen. Please see steps below for suggested methods of removal
Emulsion Remover and a pressure washer. Do not leave emulsion remover on for longer than 1 minute, it will harden the product.
Hyper Haze (degreaser and ghost remover) and a pressure washer. This product can be left overnight in order to soften the product for removal with the pressure washer
See our other items
Payment
We accept payment by any of the following methods:
PayPal, Google Pay, Visa, Mastercard, American Express and Discover
Shipping
We offer
FREE shipping
on all orders in the continental USA!
Your order will be dispatched same day after  receiving payment (Monday-Friday) if order is made by 12:00 PM PST and you should expect to receive it  two days after dispatch. If order is purchased together with multiple products your order may ship ground 3-5 days.
In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement.
About
​​​​​​​
Mission
Screen Print Direct promises high quality products at revolutionary prices. We have cut the middle man out of the equation and offer superior products straight from the manufacturer. We will continue to innovate and only produce the best products at the best prices.
Our Promise
We promise to always provide affordable high quality products. We also promise to offer the best customer service and best screen printing advice, your success is our success. Our customers are real hustlers and go-getters! We know the humble beginnings of a print shop and your ambitious attitude & drive inspires us daily!
Returns
If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not.
You can return a product for up to 14 days from the date you purchased it.
Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt.
Shop By Department
For Use With:
Water-Based Inks
Discharge
Key Features:
Fast Drying
Non Hazardous
Fills Open Areas
Good for long print runs
Simple & Easy To Use
Ecotex® Water Based Resistant Block Out is the ultimate screen block out. This fast drying formula is durable and high abrasion resistant. It's designed to fill open areas of the screen not covered by the emulsion. It is ideal for water based and discharge printing.
Shelf Life:
+12 months
For best results follow the steps below.
When the screen is dry and free of contaminants, put the block out on the print  side of the screen and spread it over the open areas until it is completely filled.
Touch up the defects. This includes blobs of product which tend to dry outside and pop off or smear during printing. When very fine meshes are used you can reduce the viscosity by adding a little bit of water.
Suggested methods for removal:
Due to the water resistant nature of this product it is hard to reclaim off of your screen. Please see steps below for suggested methods of removal
Emulsion Remover and a pressure washer. Do not leave emulsion remover on for longer than 1 minute, it will harden the product.
Hyper Haze (degreaser and ghost remover) and a pressure washer. This product can be left overnight in order to soften the product for removal with the pressure washer