Flexible PEI Spring Steel Sheet Build Surface Plate+Magnetic Base For 3D Printer

Description

Flexible PEI Spring Steel Sheet Build Surface Plate+Magnetic Base For 3D Printer
Model:
220x220mm
Package included:
1 x 220x220mm Spring steel sheet applied PEI
1 x Magnetic Base with 3M 9448A Sticker
Model:
235x235mm
Package included:
1 x 235x235mm Spring steel sheet applied PEI
1 x Magnetic Base with 3M 9448A Sticker
Model:
310x310mm
Package included:
1 x 310x310mm Spring steel sheet applied PEI
1 x Magnetic Base with 3M 9448A Sticker
Descriptions:
♞【Wide applicability】Suitable for PLA, ABS, HIPS, PETG, TPE filament, nylon, PC, RETT materials; For most 3D printer hotbed;
♞【Strong heat resistance 】 high temperature resistance and no deformation; magnetic base can withstand high temperature of 140°C without losing magnetism,this spring steel sheet is flat, flexible, stainless stick to magnets very well.
♞【Easy to Install & Removable】Flexible,removable,stick to magnets very well; Fast heater performance reduces the waiting time after printing;The printed model can be removed by bending slightly without using other tools. After removing it, it will return to a flat state without damage to the mold.PEI is 3M 9448A tape pre-applied, free bubbles.No Glue Needed.please remove the protective film before printing.
♞【Assembly requirements】It is necessary to ensure that the magnetic spring steel film is tightly attached to the platform or the hot bed, and there can be no gaps between them. It is recommended to install on the platform with counterbore. If it is installed on the through-hole platform, it is necessary to ensure that the fixing screws will not top to it.
♞【High Compatibility】Compatible with Creality Ender-3 Pro, Ender-3 V2，Ender-3, Ender-3S, Ender-3X, Ender-5, Ender-5 Pro，CR20, CR20 Pro and other similarly sized 3D printers.
Descriptions:
1. No glue is needed, just tear off the protective film and print directly.
2. Easy to clean, wipe with wet paper towel or alcohol before printing.
3. The printing does not warp the edge, and the stickiness is strong.
4. Use high-quality stainless steel spring steel with good flatness.
5. The printed model can be removed without the aid of other tools, and can be bent back to a flat state without damaging the model.
6. It is resistant to high temperature and does not deform, attracting magnets.
7. PEI matte surface. It can bond various printing consumables, especially PLA and ABS.
8. With boss design, it is convenient to install and disassemble.
The magnetic base can stand the high temp at 140C without losing magnetism, suitable for almost all filaments.  PLA, ABS, PC, etc
Material:
100% real Ultem1000（ PEI）amber color, matte surface.-0.2mm thickness.
This spring steel sheet is flat, flexible, stainless stick to magnets very well.
PEI is 3M 9448A tape pre-applied, no bubbles.
The best method to attach the sheet to a 3D print bed is to use 3M 9448A adhesive transfer tape.The adhesive is heat resistant and provides a strong bond. This method provides the most level print surface.
Notice:
Be aware that there is protective film on both sides of the PEI sheet. These need to be removed prior to use. Film is colored blue for your convenien