WASTE OIL HEATER Multi-Fuel with Pedestal & Chimney Kit - 120,000 BTU - 15 Gal

Description

Free Shipping
within the
Lower 48 United States
. If you are located outside of the Lower 48 United States, please request a freight quote.
Model Number:
PTAENH001 & PT36626 & PTBAE0209
Condition:
New
Description:
WASTE OIL HEATER Multi-Fuel with Pedestal & Chimney Kit - 120,000 BTU - 15 Gal
Features:
120,000 BTU - 15 Gallon Capacity - Burn Used or New Motor Oil, Vegetable Oil, Used or New Transmission Fluid, Used or New Hydraulic Fluid and Kerosene in this Heater - 6" Flue - EPA, UL and CUL/CSA Approved - Includes Through-the-Wall Chimney Kit and 12" Pedestal.
THIS LINE OF COMMERCIAL EXHAUST FANS IS AVAILABLE IN FOLLOWING CONFIGURATIONS:
Sizes range between 24" to 48"
Motors from 1/3 to 2 Hp
Single Phase or 3 Phase
CFM Ranges from 3,270 to 25,455
Please Note:
These units are built to order. Please allow 5 to 8 Business Days for manufacturing and shipping
Description & Specification:
Commercial Heavy Duty 120,000 BTU Waste Oil and Multi-Fuel Heater with Through-the-Wall Chimney Kit and 12" Pedestal - EPA, UL and CUL/CSA Approved
Designed for Commercial Applications - Ideal for commercial garages, fleet maintenance facilities and other commercial facilities.  Easy to maintain and operate
Burn the Following Oils & Fluids in this Heater:
Used or New Motor Oil, Vegetable Oil - Used or New Transmission Fluid, Used or New Hydraulic Fluid and Kerosene
Generates 120,000 BTU of clean affordable heat
Fuel Tank Capacity: 15 Gallons
Consumption Rate: 4/5th of a gallon of waste or new oil or fluid per hour
Feed Method: Drip
Power Source: 115V electric
Ignition Type: Manual
Fuel Pump Motor: 3.8 Amp
Exhaust Pipe Required: 6"
Connects directly to your existing 6" exhaust piping
Flue Size: 6"
Thermostat: Remote
Exhaust Type: Updraft
Fan: 16" Circulating - 115V
Exterior Material: Powder Coated Steel
Heating Chamber Material: 12 Gauge Steel
Cleaning & Inspection: Performed through easy-access fire box
Filtering: Spin-on filter (similar to an automotive oil filter)
This heater is fully enclosed to reduce noise
Control box has integrated circuit board and indicator lights
Note: this heater will burn sythetic oil
ONLY
when it is deluted with 75% petroleum based motor oil.  Synthetic oil cannot be greater than 25% of the oil used to fuel this heater.  This heater will not burn straight synthetic oil nor oil that is contaminated with water or anti-freeze
Oil needs to be at least 45ºF to properly circulate through the pump - you may need to heat your oil before you fire your heater
EPA approved for use in all states in the USA
Listings and Approvals: UL - Conforms to UL Standards - CUL/CSA - Conforms to CUL/CSA Standards
Includes 12" pedestal which raises heater 12" off the ground and provides easier access for fueling, cleaning and maintenance
Includes Through-the-Wall Chimney Kit - 6" (see photo in this listing)
Optional Item: Model PT221551
- Waste Oil Collection and Holding Tank - Eliminates awkward drain pans and reduces spills. 14 gauge steel tank has pneumatic spoked wheels, steerable front caster and a long handle for easy transport. Low profile slips under any car or truck. Removable metal screen for draining filters. V-bottom tank slopes and has a 3/4" clean-out hole for easy drainage. Uses any standard furnace filter to capture larger non-burning particles.  Please Inquire.
Optional Item:
Model PTBAE0209
- Heater Stand/Pedestal - Raises your heater 12" off the ground - provides easier access for fueling, cleaning and maintenance (please inquire)
Optional Item:
Model PTBAE0209
- Through-the-Wall Venting Kit - 6" (please inquire)
Overall Dimensions: 23" W x 30" L x 42" H
Please allow 2 weeks for delivery - we build this heater to order
Ship weight: 297 Lbs
5 Year Manufacturer's Warranty on Heat Chamber (Includes Parts & Labor)
1 Year Manufacturer's Warranty on Remainder (Includes Parts & Labor)
Lifetime technical support
is included
Returns ARE NOT accepted for this heater as we built them to order.  Should you heater become inoperable for ANY reason, you will be required to exercise your warranty and call our technical support.  We will not only provide technical support, we will also provide parts as needed at no charge under your warranty
Made in the U.S.A.